SECTIONS
Introduction
Before you begin: General tips for all binding methods
Binding Methods
The T-Male Big Brothers Binder Program
Appendix: Determining bra and cup size
The term "binding" refers to the process of flattening one's breast tissue in order to create a male-appearing chest. The type of materials and methods used for successful binding will vary depending on the size of one’s chest and the overall build of one's body.
There is no "one-size-fits all" binding method because everyone is shaped differently, and we all have different levels of comfort with our bodies. Some trans guys don't bind at all. Some slump or hunch over to hide their chests (which can be very effective but can also cause posture problems over time). Some use different methods of layering clothing to help hide their chests. Some bind only on certain occasions; some bind all the time.
For those who do choose to bind, a number of binding methods and tips are described below, along with contact information for companies that offer binding products.
Before you begin: General tips for all binding methods
Pain and discomfort
Certain methods of binding can be sweaty, uncomfortable, or even painful, as well as restrictive to your movement and even your breathing if done too tightly. Please use caution and common sense when binding-- if it hurts, cuts your skin, or prevents you from breathing, it is too tight.
In the past, trans guys used to rely on do-it-yourself binding solutions because there weren't any ready-made products available to suit the purpose. Some of these DIY binding methods (like wrapping yourself in ace bandages or duct tape) are still easily accessible, but they aren't very good for your body, and can even cause serious injury. Now that there are safer binding methods available (and even binder donation programs for those who cannot afford a binder), it is best to avoid methods like Ace bandages and tape.
You may also be tempted to try buying a binder that is one size too small in the hopes that it will flatten your chest even more. Avoid this type of thinking and buy the size that correlates to your physical measurements. Binders are already designed to be very tight when they fit properly-- buying a size too small will be so tight that it may cause severe discomfort or injury.
Give yourself a break from binding! The compression on your skin and body from a binder is a lot to take, so don't bind all day and all night. And when you begin binding, start with just a few hours at a time to let your body get used to it.
Sweating and skin irritation
If a binder's material doesn't breathe or wick away sweat, you can end up with sores or rashes on your skin. One way to minimize this risk is to apply a non-irritating body powder to your skin before binding. Another is to wear a thin undershirt beneath your binder that is made of fabric that wicks away sweat. This can help absorb moisture and prevent irritation that may arise from scratchy binding materials. Remember to allow your skin some time off from binding, and keep your binders clean.
Do not use tape to bind, especially directly on your skin, as it may cut you, cause painful rashes, and pull off layers of skin and hair when removed. It also tends to be too rigid, making it difficult to breathe and move.
Binder modification
You might find that the binder you choose will tend to roll up in certain areas, particularly around the waist. If this is a problem for you, try sewing an extra length of fabric all the way around the bottom of the binder, and tuck that extra material snugly into your pants.
If you find that you have areas of chafing or bulging around the armpit area, you might want to try trimming and/or otherwise altering that area with a needle and thread. You can often find inexpensive solutions, such as spandex, Lycra, Velcro, and other materials at your local fabric store, using trial and error to make alterations that suit your specific frame.
It is worth checking with FTM organizations, FTM internet groups, and FTM web pages for advice on common binding challenges and problems; many guys have come up with brilliant adaptations to various types of binders that involve minimal cost and a few sewing skills.
If you are not handy with a needle and thread, check your local community for a friendly tailor or costume maker who might be able to help you custom fit your binder, or even make a binder from scratch to fit you perfectly.
Other tips
If economically feasible, try to experiment with binding methods to find something as comfortable and breathable as possible while still maintaining a look for your chest that you can live with. If a binder doesn't work well for you, consider donating it or selling it to another trans man who might have better luck with it.
Layering of shirts
If you don't want to wear any type of binding device, or if you are taking a day off from binding to give your chest a breather, you might be able to layer your clothes in a way that hides your breasts. Try wearing a tight fitting undershirt or sports bra as a bottom layer to keep things from moving around a lot, then a loose t-shirt (or two loose t-shirts) over that). Each successive layer should be looser than the one underneath. A button down shirt as the top layer can help hide not only the chest but also wider hips or narrow shoulders. Of course, wearing lots of shirts can get quite uncomfortable in warm weather; breathable and moisture-wicking fabrics can help combat this problem.
Sports bra
A tight-fitting sports bra works well for some guys, while others sometimes use a combination of two or three sports bras in layers to accomplish the desired look. You might want to use a sports bra in combination with a layering of shirts as described above. Many companies make sports bras, and it may be worth the effort to go to a sporting goods store and try on several brands to see which one works the best for your shape. Look for bras with a high Lycra content for compression.
Neoprene waist/abdominal trimmers or back support
devices
Neoprene is a thick, rubbery material-- if you've ever seen a wet suit, that's neoprene. It is often used for knee, elbow, or other athletic braces. The advantages of neoprene and rubber-type devices are that they flatten the chest very effectively, are fairly inexpensive (between $10 and $20), and are easily found in drug stores or large chain discount stores. The bad thing about them is that the material doesn't breathe at all, which means that sweat, heat, chafing, and even blisters can be a problem. They can also smell a bit rubbery. Some guys wear a moisture-wicking thin undershirt or absorbent body powder underneath neoprene to help prevent chafing.
Neoprene waist trimmers and back supports are designed to wrap around the torso. They are usually red or blue on one side and black on the other side, with some kind of Velcro closure. Wrap the neoprene around your chest tightly, and fasten so that the Velcro closure is placed along your side, underneath your arm, so it is less visible through your clothes. You may need to carefully trim the binder to fit your size. If the Velcro closure loses its effectiveness over time, you might try sewing on new fasteners to get more life out of the binder.
Athletic compression shirts
A number of athletic apparel manufacturers make performance garments called “compression shirts.” These shirts are very tight fitting, and are usually made from Spandex, Lycra, or similar stretchy material. Compression shirts are designed to aid in muscle recovery, and often have excellent moisture wicking properties. Companies like Underarmour (www.underarmour.com) and Sweat it Out (www.sweatitout.com) make compression gear for athletes.
A number of sporting good retail stores carry Underarmour shirts (as well as some other compression brands), so you might be able to find a place near you to try them on. Recommended Underarmour shirts are the Men's HeatGear Full T ($24.99), the Men's HeatGear Sleeveless T ($24.99), as well as sport-specific variations of compression shirts that are added to their line periodically. In general, look for items in the "heat gear" category of compression shirts, as these are designed to be very breathable and help keep you dry. Searching on the Underarmour site for "heat gear compression" will turn up a variety of results. Underarmour also has youth sizes if you need something smaller-- the youth sizes are also less expensive.
People with minimal chest tissue can sometimes use athletic compression shirts successfully as binders. However, those with medium-to-large amounts of tissue will probably find that these types of shirts do not have enough compression to flatten the chest. People with larger chests should consider medical/binding compression wear as described in the following sections.
Chest binders/medical compression shirts
There are a number of products on the market made for non-trans males who have large chests due to excessive body weight or due to gynecomastia (a condition of enlarged breast tissue in men). These products usually require shopping through a specialty supplier, but they typically provide more compression than the typical athletic compression shirt. Each of the companies listed below offers compression wear that can be used quite effectively for binding.
Underworks (ftm.underworks.com) makes a range of chest binders for trans and non-trans men, as well as post-surgical compression wear. Underworks is trans-friendly, so don't be afraid to contact them to and ask questions specific to your needs.
The Tool Shed (www.toolshedtoys.com) carries a few of the most popular chest binder designs from Underworks, including the Underworks Tri-top Chest Binder (style 983, $29.99), the Underworks Double Front Compression Shirt Chest Binder (style 997, $29.99), Underworks Cotton Concealer Muscle Shirt Chest Binder (style 974, $32.99) and Underworks Concealer Chest Binder V-neck Tshirt (style 978, $34.99) in sizes XS through 3XL. The Tool Shed also sells packers, realistic dildos, and STP devices-- check the "gender expression" section of the product menu. Note: Purchasing products through the Tool Shed web site directly supports FTMguide.org. The Tool Shed is a trans and partner friendly.
Morris Designs (www.morrisdesigns.com) offers post-surgical and gynecomastia shirts, including two styles that fasten in the front for ease of use. They make three versions of their Gynecomastia Vest (each costs $56.00) and a model called the Zippered Male Vest with reinforced chest panels ($70.00). They also make a simple velcro wrap-around binder called the Dale Binder ($40.00–$54.00, depending on size) which could be used for chest binding, though perhaps not as comfortably or effectively as the vests. Morris Designs does custom orders for people who might need a special size; check their web site or call them for details.
NouVelle (www.nouvelleinc.com) NouVelle offers a variety of compression garments, including male compression vests. They offer 4 products that could be used for binding: the Adjustable Tank ($65.00) and the Zippered Vest ($80.00) are more traditional binders, while the Pull-On Shirt ($60.00) and Pull-On Tank ($55.00) might be better for those with smaller chests.
Products designed specifically for FTM binding
In the past decade, a number of companies have formed to make chest binders specifically for the needs of trans people. Many of these companies are located in Asia, but all offer mail order through their web sites.
GC2b (www.gc2b.co) provides high quality chest binders at a reasonable price. Their binders feature a front and back, double panel, mixed material design to construct a flat appearance.
Mansculpture (www.mansculpture.com) has created multi-layer chest binders that are designed with both comfort and style as their main priorities. Unlike many chest binders, Mansculpture binders are styled so that they can be worn as a plain undershirt if so desired. Thy offer both pull-over and side zipper styles.
T-Kingdom of Taiwan (www.t-kingdom.com) was one of the first companies to design FTM-specific binders, and they offer several options, including pull-over, Velcro, and zippered styles.
The Double T collection of Taiwan (http://en.mydouble.net/) includes several kinds of binders, including pull-over, Velcro, and zippered styles.
Esha of Taiwan (http://www.esha-taipei.net/en/) also makes several kinds of binders including pull-over, Velcro, and zippered styles.
Danae of Holland (http://www.danae.info/en) makes their "Trans-Vormer" binder tops in about 10 different varieties. They also offer custom sizing for the hard-to-fit individual.
The T-Male Big Brothers Used Binder Program
www.thetransitionalmale.com/BBUB.html
For those who may not be able to afford new, full-price chest binders, check out the T-Male
Big Brothers Binder Program. Binders are donated to the program by guys who
have had their chest surgery, or whose binders may no longer fit. The selection
varies depending on recent donations, so check the site frequently.
Chest Binder Reviews Site
chestbinders.wordpress.com
The Chest Binder Reviews web site was started in the fall of 2007, and contains written reviews of various binding products. Binders are rated by on effectiveness, comfort, and discreetness, and include descriptive text. Some reviews also include photos.
Was this page helpful to you?
Please consider donating to ftmguide.org!
Appendix: Determining bra and cup size
Perhaps ironically, it can sometimes be helpful to know your bra and cup size when comparing notes with other trans men on binding solutions, or when speaking to a store like Title 9 Sports when ordering an item such as the Frog Bra. However, many of us have never known this information.
Described below are two popular ways to calculate your bra and cup size should you need this information for binding. Keep in mind that each bra company may come up with its measurements in a slightly different way, such that a 32 B in one company might fit slightly differently than another company's 32 B. These methods should get you started-- whenever possible, check with the company you are buying from to see if they have a recommended measuring/sizing guide.
For both measuring methods described below, you'll need two measurements: your frame size and your frame + breast size.
METHOD ONE:
Frame size
Your frame size is obtained by measuring the diameter around your ribcage (in
inches) just below your breasts (i.e. no breast tissue should be part of the
measurement) and then adding 5 inches to that number. Why? That is just the
standard that many bra companies profess to use. So, if your frame measurement
is 27, then you would wear a size 32 bra (27 + 5 = 32).
Frame + breast size
Next, measure (in inches) around the chest, over and including the largest part
of the breast (usually around the level of the nipples). If your breast tissue
droops a lot, it might be best to do this measurement in a comfortable sports
bra if you have one.
Subtract the first measurement from the second measurement, and use the table below to determine your cup size.
Example: If your frame measurement is 27, add 5 to get 32. If your frame plus breast measurement is 34, then 34 minus 32 is 2 inches, or a "B" cup. Your bra size is therefore 32 B.
Difference = Cup Size
0 to 1/2 inch: AA
1/2 to 1 inch: A
1 to 2 1/2 inches: B
2 1/2 to 3 1/2 inches: C
3 1/2 to 4 1/2 inches: D
4 1/2 to 6 inches: DD (E)
6 to 7 inches: DDD (F)
7 to 8 inches: G
Keep in mind that these measurements are just general standards. Like many women's clothing measurements, they sometimes vary depending on the manufacturer or style. That being said, these measurements should give you enough information for a good idea of bra and cup size if you need them.
METHOD TWO:
Frame size
Your frame size is obtained by measuring the diameter around your upper chest (in inches) at the area just below your armpits and above your breasts. If this measurement is an even number, this is your frame size. If an odd number, add 1 inch to determine your frame size.
Frame + breast size
Next, measure (in inches) around the chest, over and including the largest part of the breast (usually around the level of the nipples). If your breast tissue droops a lot, it might be best to do this measurement in a comfortable sports bra if you have one.
Subtract the first measurement from the second measurement, and use the table below to determine your cup size.
Example: If your frame measurement is 32, and your frame plus breast measurement is 34, then 34 minus 32 is 2 inches, or a "B" cup. Your bra size is therefore 32 B.
Difference = Cup Size
less than 1 inch: AA
1 inch: A
2 inches: B
3 inches: C
4 inches: D
5 inches: DD (E)
6 inches: DDD (F)
7 inches: DDDD (G)
8 inches: FF
Keep in mind that these measurements are just general standards. Like many women's clothing measurements, they sometimes vary depending on the manufacturer or style. That being said, these measurements should give you enough information for a good idea of bra and cup size if you need them.
Back to Hudson's FTM Resource Guide main page
Copyright, disclaimer, and privacy information